AIR INJECTION DRIVER (w/ Secondary Air Injection System) > INSTALLATION |
| 1. INSTALL AIR INJECTION CONTROL DRIVER (for Bank 2) |
![]() |
Install the air injection control driver with the 2 screws.
| 2. INSTALL AIR INJECTION CONTROL DRIVER (for Bank 1) |
![]() |
Install the air injection control driver with the 2 screws.
Install the 2 bolts.
| 3. INSTALL AIR INJECTION CONTROL DRIVER ASSEMBLY |
![]() |
Install the air injection control driver with the 3 bolts.
![]() |
Connect the 2 wire harness clamps.
Connect the ground cable with the bolt.
![]() |
Connect the 4 air injection control driver connectors.