Home › Vehicle Exterior › WINDOW / GLASS › WINDOW DEFOGGER SYSTEM

WINDOW DEFOGGER SYSTEM > OPERATION CHECK

for Preparation Click here



CHECK WINDOW DEFOGGER OPERATION
  1. Turn the ignition switch to ON.

  2. Check that pressing the defogger switch illuminates the indicator and warms the rear window surface.

    HINT:
    The rear window defogger and rear wiper will not operate if the back door power window is not initialized. Initialize the back door power window (Click here).

  3. Check that after approximately 15 minutes, the indicator light turns off and the window defogger deactivates.