OVERHEAD CONSOLE BOX > INSTALLATION |
| 1. INSTALL ROOF CONSOLE BOX ASSEMBLY (for Short Type) |
Connect the connector.
![]() |
Attach the 2 guides and using a "TORX" socket wrench T20, install the roof console box with the 4 screws.
| 2. INSTALL ROOF CONSOLE BOX ASSEMBLY (for Long Type) |
Connect the connector.
Attach the 2 guides and using a "TORX" socket wrench T20, install the roof console box with the 6 screws.

Attach the 4 claws to install the cover.