OVERHEAD CONSOLE BOX > REMOVAL |
| 1. REMOVE ROOF CONSOLE BOX ASSEMBLY (for Short Type) |
![]() |
Detach the 2 guides and using a "TORX" socket wrench T20, remove the 4 screws.
Disconnect the connector and then remove the roof console box.
| 2. REMOVE ROOF CONSOLE BOX ASSEMBLY (for Long Type) |
Using a screwdriver, detach the 4 claws and remove the cover.

Detach the 2 guides and using a "TORX" socket wrench T20, remove the 6 screws.
Disconnect the connector and then remove the roof console box.