Home › Engine / Hybrid System › 3UR-FE LUBRICATION › ENGINE OIL COOLER

ENGINE OIL COOLER > INSPECTION

for Preparation Click here



1. INSPECT OIL COOLER ASSEMBLY


    A164028E01
  1. Check the oil cooler for damage or clogging.
    If necessary, replace the oil cooler assembly.



2. INSPECT OIL PUMP RELIEF VALVE


    A164029
  1. Coat the relief valve with engine oil.

  1. Check that the relief valve falls smoothly into the valve hole by its own weight.
    If the relief valve is not as specified, replace it. If necessary, replace the oil filter bracket.