Home › Engine / Hybrid System › 3UR-FE ENGINE CONTROL › MASS AIR FLOW METER

MASS AIR FLOW METER > ON-VEHICLE INSPECTION

for Preparation Click here



1. CHECK MASS AIR FLOW METER


  1. Check the mass air flow value.

    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the intelligent tester main switch on.

    4. Enter the following menus: Powertrain / Engine / Data List / All Data / MAF.



    5. A165593E01
    6. Blow air into the MAF meter, and check that the MAF value fluctuates.
      If the result is not as specified, check the MAF meter , or wiring and ECM (Click here).