AIR FUEL RATIO SENSOR > REMOVAL |
| 1. REMOVE FRONT NO. 2 EXHAUST PIPE SUB-ASSEMBLY |
Disconnect the air fuel ratio sensor connector.
Disconnect the heated oxygen sensor connector and 2 clamps.
![]() |
Remove the 2 bolts and 2 nuts from the front No. 3 exhaust pipe sub-assembly.
Remove the 3 nuts, 2 gaskets and front No. 2 exhaust pipe sub-assembly.
| 2. REMOVE FRONT EXHAUST PIPE ASSEMBLY |
Disconnect the air fuel ratio sensor connector.
Disconnect the heated oxygen sensor connector and detach the 2 clamps.
![]() |
Remove the 2 bolts from the center exhaust pipe.
Remove the 3 nuts, front exhaust pipe and 2 gaskets.
| 3. REMOVE AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1) |
![]() |
Using SST, remove the air fuel ratio sensor.
| 4. REMOVE AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1) |
![]() |
Using SST, remove the air fuel ratio sensor.