Home › Vehicle Interior › SEAT › REAR CENTER SEAT ASSEMBLY

REAR CENTER SEAT ASSEMBLY > DISASSEMBLY

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.



1. REMOVE REAR SEAT CUSHION HINGE COVER UPPER LH


    B191147
  1. Detach the hook.

  1. Remove the screw.

  1. Detach the 2 claws and remove the rear seat cushion hinge cover.



2. REMOVE REAR SEAT CUSHION HINGE COVER UPPER RH


    B191148
  1. Detach the hook.

  1. Remove the screw.

  1. Detach the 2 claws and remove the rear seat cushion hinge cover.



3. REMOVE CENTER SEAT CUSHION ASSEMBLY


    B191149
  1. Detach the hook and loop fastener and hook.



    B191150
  1. Remove the 2 bolts.

  1. Using a T45 "TORX" socket wrench, remove the 2 "TORX" bolts and 2 bushes. Then remove the center seat cushion.



4. REMOVE REAR SEAT CUSHION SPRING ASSEMBLY


B191151
  1. Detach the hooks and remove the rear seat cushion spring.



5. REMOVE CENTER SEAT CUSHION COVER SUB-ASSEMBLY


    B191152
  1. Remove the 7 hog rings and seat cushion cover from the seat cushion pad.



6. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY


7. REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY


    B191154
  1. Detach the 6 clips and remove the rear seatback board.



8. REMOVE CENTER SEAT HINGE COVER LH


    B191155
  1. Remove the screw.

  1. Detach the 3 claws and clip and remove the center seat hinge cover.



9. REMOVE CENTER SEAT HINGE COVER RH


    B191156
  1. Remove the screw.

  1. Detach the 3 claws and clip, and remove the center seat hinge cover.



10. REMOVE REAR SEAT CUSHION UNDER COVER


    B191157
  1. Remove the 2 screws and rear seat cushion under cover.



11. REMOVE CENTER SEAT INNER BELT ASSEMBLY


B191158
  1. Remove the bolt and center seat inner belt assembly.



12. REMOVE REAR SEAT SHOULDER BELT HOLE COVER NO. 1


    B191160
  1. Detach the 4 claws and remove the rear seat shoulder hole cover No. 1.



13. REMOVE REAR SEATBACK LOCK BEZEL UPPER


    B191159
  1. Remove the center seat outer belt lower bolt.



    B191161
  1. Remove the 2 screws and rear seatback lock bezel upper.



14. REMOVE REAR SEAT SHOULDER BELT HOLE COVER NO. 2


    B191162
  1. Using a T30 "TORX" socket wrench, remove the 2 bolts and rear seat shoulder belt hole cover No. 2.



15. REMOVE REAR SEATBACK LOCK STRIKER COVER


    B191163
  1. Using a screwdriver, detach the claw and guide, and remove the rear seatback lock striker cover.

    HINT:
    Tape the screwdriver tip before use.



16. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH


    B191245
  1. Remove the 2 screws.

  1. Disconnect the cable and remove the rear seat lock control lever.



17. REMOVE REAR SEAT HEADREST SUPPORT


B191165
  1. Detach the 4 claws and remove the 2 rear seat headrest supports.



18. REMOVE REAR SEAT SHOULDER BELT HOLE COVER NO. 3


    B191168
  1. Remove the 2 screws.

  1. Detach the 2 claws and remove the rear seat shoulder belt hole cover No. 3.



19. REMOVE ARMREST ASSEMBLY


    B191167
  1. Remove the 2 nuts and armrest.



20. REMOVE CENTER ARMREST HINGE COVER LH


    B191169
  1. Remove the screw, slide the center armrest hinge cover LH forward to remove it, as shown in the illustration.



21. REMOVE CENTER ARMREST HINGE COVER RH


    B191170
  1. Remove the screw, slide the center armrest hinge cover RH forward to remove it, as shown in the illustration.



22. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY LH


    B191173
  1. Remove the bolt and rear seatback hinge.



23. REMOVE REAR SEATBACK HINGE SUB-ASSEMBLY RH


    B191174
  1. Remove the bolt and rear seatback hinge.



24. REMOVE SEATBACK COVER WITH PAD


    B191176
  1. Remove the 5 hog rings.



    B195228
  1. Remove the 6 hog rings.



    B195220
  1. Detach the hooks.



    B191175
  1. Detach the hooks and remove the seatback cover with pad.



25. REMOVE CENTER SEATBACK COVER SUB-ASSEMBLY


    B191178
  1. Remove the center seatback cover from the center seatback pad.



26. REMOVE CENTER SEAT OUTER BELT ASSEMBLY


B191179
  1. Remove the cable tie.

  1. Remove the 4 nuts and center seat outer belt assembly.



27. REMOVE CENTER SEAT HINGE COVER UPPER LH


    B191181
  1. Remove the screw.

  1. Detach the 2 claws and remove the center seat hinge cover upper.



28. REMOVE CENTER SEAT HINGE COVER


    B191180
  1. Remove the screw.

  1. Detach the 2 claws and remove the cover.



29. REMOVE CENTER SEATBACK FRAME SUB-ASSEMBLY


    B191182
  1. Remove the 2 bolts.

  1. Using a T55 "TORX" socket wrench, remove the 2 bolts and center seatback frame.



30. REMOVE REAR SEAT RECLINING CONTROL CABLE


    B191183
  1. Detach the 2 clamps.

  1. Rotate the cable ends and remove the rear seat reclining control cable.

  1. Pull the cable through the center seatback frame.



31. REMOVE REAR NO. 1 SEAT ADJUSTER SUB-ASSEMBLY


    B191184
  1. Remove the 3 nuts and rear No. 1 seat adjuster.



32. REMOVE REAR NO. 1 SEAT ADJUSTER ASSEMBLY


    B191185
  1. Remove the 3 nuts and rear No. 1 seat adjuster.



33. REMOVE REAR SEAT TRACK ADJUSTING HANDLE


    B195231E01
  1. Slide the slide rail to the rearmost position.

  1. Using a small screwdriver, push down the handle stopper to detach the claw and remove the adjusting handle.

    HINT:
    Insert the screwdriver in the hole shown in the illustration, while looking into the hole.



34. REMOVE REAR SEAT BRACKET


    B191187
  1. Remove the 2 nuts and rear seat bracket.