REAR DOOR SPEAKER > INSTALLATION |
| 1. INSTALL REAR NO. 2 SPEAKER ASSEMBLY (for 12 or 14 Speakers) |
![]() |
Attach the 3 claws to install the speaker to the door trim board.
| 2. INSTALL REAR NO. 1 SPEAKER ASSEMBLY |
![]() |
Attach the 2 claws.
![]() |
Install the speaker with the 3 screws.
Connect the connector.
| 3. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY RH |
![]() |
Connect the rear door lock remote control cable and the rear door inside locking cable.
Connect the connector.
![]() |
Attach the 9 clips to install the rear door trim board sub-assembly.
![]() |
Tighten the 2 screws.
Install the rear door armrest cover.
| 4. INSTALL REAR DOOR ARMREST BASE UPPER PANEL RH |
Connect the connector.
![]() |
Attach the 2 clips and 5 claws to install the rear door armrest base upper panel.
| 5. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG RH |
![]() |
Attach the 4 claws to install the rear door inside handle bezel plug.
| 6. INSTALL REAR DOOR FRAME GARNISH RH |
![]() |
Attach the 6 clips to install the rear door frame garnish.