Home › Vehicle Interior › POWER OUTLETS (INT) › POWER OUTLET SOCKET

POWER OUTLET SOCKET > INSTALLATION

for Preparation Click here



1. INSTALL POWER OUTLET SOCKET COVER


    E162357
  1. Attach the 2 claws to install the power outlet socket cover.



2. INSTALL POWER OUTLET SOCKET ASSEMBLY


    E162356
  1. Attach the claw to install the power outlet socket assembly.



3. INSTALL CENTER LOWER INSTRUMENT PANEL FINISH PANEL
  1. Connect the connectors.

  1. Attach the 4 clips and 2 claws to install the finish panel.



4. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY (w/o Cool Box)


    B222976
  1. Connect the connectors.

  1. Attach the 6 clips to install the console panel.

  1. Install the clip.



5. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY (w/ Cool Box)
  1. Connect the connectors.

  1. Attach the 6 clips to install the console panel.

  1. Install the clip.



6. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (w/o Cool Box)


    B161742
  1. Attach the 12 clips to install the console panel.



7. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY (w/ Cool Box)
  1. Attach the 12 clips to install the console panel.



8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (w/o Cool Box)


    B167312
  1. Install the shift lever knob and twist it in the direction indicated by the arrow.



9. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (w/ Cool Box)


    B167312
  1. Install the shift lever knob and twist it in the direction indicated by the arrow.