Home › Vehicle Interior › POWER OUTLETS (INT) › POWER OUTLET SOCKET

POWER OUTLET SOCKET > REMOVAL

for Preparation Click here



1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (w/o Cool Box)


    B161741
  1. Twist the shift lever knob in the direction indicated by the arrow and remove it.



2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (w/ Cool Box)


    B161741
  1. Twist the shift lever knob in the direction indicated by the arrow and remove it.



3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (w/o Cool Box)


B161742
  1. Detach the 12 clips and remove the console panel.



4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (w/ Cool Box)


    B161742
  1. Detach the 12 clips and remove the console panel.



5. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY (w/o Cool Box)


B222976
  1. Move the shift lever to N.

  1. Remove the clip.

  1. Detach the 6 clips and remove the console panel.

  1. Disconnect the connector



6. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY (w/ Cool Box)


    B222976
  1. Move the shift lever to N.

  1. Remove the clip.

  1. Detach the 6 clips and remove the console panel.

  1. Disconnect the connector



7. REMOVE CENTER LOWER INSTRUMENT PANEL FINISH PANEL


    B223270
  1. Detach the 4 clips and 2 claws.

  1. Disconnect the connectors and remove the finish panel.



8. REMOVE POWER OUTLET SOCKET ASSEMBLY


    E162355E01
  1. Using a screwdriver with its tip wrapped in protective tape, detach the claw and remove the power outlet socket assembly.



9. REMOVE POWER OUTLET SOCKET COVER


    E162357
  1. Detach the 2 claws and remove the power outlet socket cover.