POWER OUTLET SOCKET > REMOVAL |
| 1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (w/o Cool Box) |
![]() |
Twist the shift lever knob in the direction indicated by the arrow and remove it.
| 2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (w/ Cool Box) |
![]() |
Twist the shift lever knob in the direction indicated by the arrow and remove it.
| 3. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (w/o Cool Box) |
![]() |
Detach the 12 clips and remove the console panel.
| 4. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (w/ Cool Box) |
![]() |
Detach the 12 clips and remove the console panel.
| 5. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY (w/o Cool Box) |
![]() |
Move the shift lever to N.
Remove the clip.
Detach the 6 clips and remove the console panel.
Disconnect the connector.
| 6. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY (w/ Cool Box) |
![]() |
Move the shift lever to N.
Remove the clip.
Detach the 6 clips and remove the console panel.
Disconnect the connector.
| 7. REMOVE CENTER LOWER INSTRUMENT PANEL FINISH PANEL |
![]() |
Detach the 4 clips and 2 claws.
Disconnect the connectors and remove the finish panel.
| 8. REMOVE POWER OUTLET SOCKET ASSEMBLY |
![]() |
Using a screwdriver with its tip wrapped in protective tape, detach the claw and remove the power outlet socket assembly.
| 9. REMOVE POWER OUTLET SOCKET COVER |
![]() |
Detach the 2 claws and remove the power outlet socket cover.