CENTER POWER OUTLET SOCKET (for Center Console Side) > REMOVAL |
| 1. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY |
![]() |
Detach the 12 clips and remove the console panel.
| 2. REMOVE CONSOLE BOX BEZEL (w/o Cool Box) |
![]() |
Disengage the claw and remove the console box bezel.
Disconnect the connector.
| 3. REMOVE POWER POINT SOCKET ASSEMBLY (w/o Cool Box) |
![]() |
Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the power point socket assembly.
| *1 | Protective Tape |
| 4. REMOVE POWER POINT SOCKET ASSEMBLY (w/ Cool Box) |
Disconnect the connector.
![]() |
Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the power point socket assembly.
| *1 | Protective Tape |
| 5. REMOVE POWER OUTLET SOCKET COVER |
![]() |
Disengage the 2 claws and remove the power outlet socket cover.