Home › Vehicle Exterior › SLIDING ROOF / CONVERTIBLE › SLIDING ROOF SWITCH ASSEMBLY

SLIDING ROOF SWITCH ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE ROOF CONSOLE BOX ASSEMBLY


    B190156
  1. Detach the 2 guides and using a "TORX" socket wrench T20, remove the 4 screws.

  1. Disconnect the connector and then remove the roof console box.



2. REMOVE SLIDE ROOF MOTOR SWITCH


    B191398
  1. Disconnect the connector.



    B191399
  1. Detach the 4 claws and remove the slide roof motor switch with cover.



    B191397
  1. Detach the 4 claws and remove the slide roof motor switch.