3UR-FE EMISSION CONTROL > TORQUE SPECIFICATIONS |
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
| Air pump inlet x Air pump bracket (w/ Secondary air injection system) | 8.0 | 82 | 71 in.*lbf | |
| Air pump bracket x Body panel (w/ Secondary air injection system) | for bolt | 18 | 184 | 13 |
| for nut | 12 | 122 | 9 | |
| No. 2 and No. 3 air tube x Air switching valve (w/ Secondary air injection system) | 10 | 102 | 7 | |
| Electric air control valve x Engine (w/ Secondary air injection system) | 21 | 214 | 16 | |
| Air pipe sub-assembly x Cylinder block and timing chain cover (w/ Secondary air injection system) | 10 | 102 | 7 | |
| Front water by-pass joint x Cylinder head LH and RH | 21 | 214 | 16 | |
| Water by-pass pipe hose x Front water by-pass joint, timing chain cover and oil filter bracket | 10 | 102 | 7 | |
| Air injection control bracket x Body panel (w/ Secondary air injection system) | 8.0 | 82 | 71 in.*lbf | |
| Charcoal canister assembly x Body panel | 29 | 296 | 21 | |
| Fuel tank vent hose sub-assembly x body | 29 | 296 | 21 | |