FRONT BUMPER > REASSEMBLY |
| 1. INSTALL RADIATOR SIDE DEFLECTOR LH |
![]() |
Install the radiator side deflector with the 6 clips.
| 2. INSTALL RADIATOR SUPPORT TO FRAME SEAL RH |
![]() |
Install the radiator support to frame seal with the 2 clips.
| 3. INSTALL FRONT NO. 2 BUMPER EXTENSION SUB-ASSEMBLY LH |
![]() |
Install the front No. 2 bumper extension with the 4 nuts.
| 4. INSTALL FRONT NO. 2 BUMPER EXTENSION SUB-ASSEMBLY RH |
| 5. INSTALL FRONT BUMPER REINFORCEMENT |
![]() |
Install the front bumper reinforcement with the 6 nuts.
Connect the connectors.
| 6. INSTALL FRONT BUMPER END RETAINER LH |
![]() |
Install the front bumper end retainer with the 3 nuts.
| 7. INSTALL FRONT BUMPER END RETAINER RH |
| 8. INSTALL FRONT UPPER CENTER BUMPER RETAINER |
![]() |
Install the front upper center bumper retainer with the 6 nuts.
| 9. INSTALL FRONT BUMPER SIDE SUPPORT LH |
![]() |
Attach the 3 claws to install the front bumper side support.
Install the 2 screws.
| 10. INSTALL FRONT BUMPER SIDE SUPPORT RH |
| 11. INSTALL CLIP |
![]() |
Install the clip.
| 12. INSTALL FRONT FENDER LINER BRACKET LH |
![]() |
Attach the 2 claws to install the front fender liner bracket.
| 13. INSTALL FRONT FENDER LINER BRACKET RH |
| 14. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System) |
![]() |
Install the ultrasonic sensor retainer to the front bumper.
| 15. INSTALL NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System) |
![]() |
Attach the 2 claws to install the ultrasonic sensor.
Connect the connector.
| 16. INSTALL FOG LIGHT ASSEMBLY LH (w/ Fog Light) |
![]() |
Attach the 2 claws to install the fog light.
| 17. INSTALL FOG LIGHT ASSEMBLY RH (w/ Fog Light) |
| 18. INSTALL FOG LIGHT COVER LH |
![]() |
Attach the 6 claws to install the fog light cover.
| 19. INSTALL FOG LIGHT COVER RH |
| 20. INSTALL FRONT BUMPER GARNISH |
![]() |
Attach the 5 claws to install the front bumper garnish.
Install the 6 clips.