Home › Vehicle Interior › LIGHTING (INT) › ROOM LIGHT (for Center)

ROOM LIGHT (for Center) > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 ROOM LIGHT ASSEMBLY (w/o Rear Seat Entertainment System)


  1. Using a screwdriver with its tip wrapped in protective tape, detach the 4 claws and remove the lens.


    B190138E01

  1. Using a moulding remover D, detach the 4 clips.

  1. Disconnect the connector and then remove the No. 1 room light assembly.



2. REMOVE NO. 1 ROOM LIGHT ASSEMBLY (w/ Rear Seat Entertainment System)


    B193035E01
  1. Using a moulding remover D, detach the 4 clips.



    B191797
  1. Disconnect the connector and then remove the No. 1 room light assembly.