CENTER DIFFERENTIAL LOCK SWITCH > REMOVAL |
| 1. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY |
![]() |
Detach the 12 clips and remove the console panel.
| 2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY |
![]() |
Twist the shift lever knob in the direction indicated by the arrow and remove it.
| 3. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY |
![]() |
Move the shift lever to N.
Remove the clip.
Detach the 6 clips and remove the console panel.
Disconnect the connector
| 4. REMOVE CENTER DIFFERENTIAL LOCK SWITCH |
![]() |
Detach the 2 claws to remove the switch.