Home › Drivetrain · JF3A TRANSFER / 4WD / AWD › CENTER DIFFERENTIAL LOCK SWITCH

CENTER DIFFERENTIAL LOCK SWITCH > INSPECTION

for Preparation Click here



1. INSPECT CENTER DIFFERENTIAL LOCK SWITCH


    C174435E01
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    6 (L) - 9 (CPU)
    Switch pressed and held
    Below 1 Ω
    Switch not pressed
    100 kΩ or higher

    If the result is not as specified, replace the center differential lock switch.