Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › CURTAIN SHIELD AIRBAG CUTOFF SWITCH

CURTAIN SHIELD AIRBAG CUTOFF SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL CURTAIN AIRBAG CUTOFF SWITCH


E141183
  1. Attach the 2 claws to install the switch.

  1. Connect the connector.



2. INSTALL NO. 1 SWITCH HOLE BASE


    B192562
  1. Attach the 6 claws to install the No. 1 switch hole base.



3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



4. CHECK SRS WARNING LIGHT
  1. Check the SRS warning light (Click here).