HEADLIGHT CLEANER ACTUATOR > REMOVAL |
| 1. REMOVE FRONT END PANEL |
![]() |
Remove the 2 clips.
![]() |
Detach the 2 claws and 2 clips and remove the front end panel.
| 2. REMOVE HEADLIGHT ASSEMBLY |
![]() |
Remove the 2 screws.
Remove the bolt.
Disconnect the connectors, and then remove the headlight.
| 3. REMOVE HEADLIGHT WASHER ACTUATOR SUB-ASSEMBLY |
![]() |
Remove the 3 screws and headlight washer actuator sub-assembly LH.