Home › Vehicle Exterior › WIPER / WASHER › HEADLIGHT CLEANER MOTOR

HEADLIGHT CLEANER MOTOR > INSTALLATION

for Preparation Click here



1. INSTALL HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY


    E162538
  1. Install the headlight cleaner motor and pump onto the packing of the washer jar.



2. INSTALL WINDSHIELD WASHER JAR ASSEMBLY
  1. Connect the washer hoses.



    E161326
  1. Connect the 5 connectors and 2 clamps.

  1. Install the windshield washer jar with the 3 bolts.

    Torque:
    3.5 N*m{ 36 kgf*cm , 31 in.*lbf }



3. FILL UP WASHER JAR ASSEMBLY WITH WASHER FLUID
  1. Fill the washer jar with washer fluid.