Home › Vehicle Exterior › WIPER / WASHER › HEADLIGHT CLEANER MOTOR

HEADLIGHT CLEANER MOTOR > REMOVAL

for Preparation Click here



1. REMOVE WINDSHIELD WASHER JAR ASSEMBLY


    E161326
  1. Disconnect the 5 connectors and 2 clamps.

  1. Remove the 3 bolts and remove the washer jar.



2. DRAIN WASHER FLUID
  1. Remove the washer hoses and drain the washer fluid.



3. REMOVE HEADLIGHT CLEANER MOTOR AND PUMP ASSEMBLY


    E161333
  1. Pull the headlight cleaner motor and pump assembly out of the packing of the washer jar.