POWER WINDOW CONTROL SYSTEM > CUSTOMIZE PARAMETERS |
| CUSTOMIZING FUNCTION WITH INTELLIGENT TESTER (REFERENCE) |
Connect the intelligent tester to the DLC3.
Turn the ignition switch to ON.
Turn the intelligent tester on.
Enter the following menus: Customize Setting / Power Window.
Select the setting by referring to the table below.
| Display (Item) | Default | Content | Setting |
| Door Key P/W Up | ON | Function that raises the driver and passenger power windows when, with the ignition switch off, a key is used to hold the driver door key cylinder to the lock position for more than 2.3 seconds. | ON/OFF |
| Door Key P/W Down | ON | Function that lowers the driver and passenger power windows when, with the ignition switch off, a key is used to hold the driver door key cylinder to the unlock position for more than 2.3 seconds. | ON/OFF |
| Door Key Linked Back P/W UP | AVAIL | Function that raises the back door power window when, a key is used to hold the back door key cylinder to the lock position for more than 0.7 seconds. | NOT AVL/AVAIL |
| Door Key Linked Back P/W DOWN | AVAIL | Function that lowers the back door power windows when, a key is used to hold the back door key cylinder to the unlock position for more than 0.7 seconds. | NOT AVL/AVAIL |