Home › Drivetrain ยท DRIVE SHAFT / PROPELLER SHAFT › PROPELLER SHAFT ASSEMBLY (for 2WD)

PROPELLER SHAFT ASSEMBLY (for 2WD) > INSTALLATION

for Preparation Click here



1. INSTALL PROPELLER SHAFT ASSEMBLY


    C160071E02
  1. Remove SST from the transmission.

    SST
    09325-60010  

  1. Insert the propeller shaft assembly into the transmission.



    C179257E03
  1. Align the matchmarks on the propeller shaft flange and differential flange.

  1. Install the propeller shaft assembly to the differential side, and install the 4 nuts.

    Torque:
    70 N*m{ 714 kgf*cm , 52 ft.*lbf }



2. INSPECT FOR AUTOMATIC TRANSMISSION FLUID LEAK