Home › Drivetrain ยท DRIVE SHAFT / PROPELLER SHAFT › PROPELLER SHAFT ASSEMBLY (for 4WD)

PROPELLER SHAFT ASSEMBLY (for 4WD) > INSTALLATION

for Preparation Click here



1. INSTALL PROPELLER SHAFT ASSEMBLY


    C179258E02
  1. Align the matchmarks on the propeller shaft flange and differential flange.

  1. Align the matchmarks on the propeller shaft flange and transfer flange.

  1. Install the propeller shaft assembly with the 8 nuts.

    Torque:
    70 N*m{ 714 kgf*cm , 52 ft.*lbf }



2. INSTALL TRANSFER HEAT INSULATOR


    C158451
  1. Install the transfer heat insulator with the 3 bolts.

    Torque:
    15 N*m{ 153 kgf*cm , 11 ft.*lbf }



3. INSTALL PROPELLER SHAFT HEAT INSULATOR


    C158450
  1. Install the propeller shaft heat insulator with the 2 bolts.

    Torque:
    30 N*m{ 306 kgf*cm , 22 ft.*lbf }