Home › Suspension › SUSPENSION CONTROL › HEIGHT CONTROL SWITCH

HEIGHT CONTROL SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL HEIGHT CONTROL SWITCH (NO. 1 ABSORBER CONTROL SWITCH)
  1. Engage the 2 claws to install the height control switch (No. 1 absorber control switch).

    NOTICE:
    Securely engage the 2 claws.



2. INSTALL HEIGHT CONTROL MODE SELECT SWITCH (NO. 2 ABSORBER CONTROL SWITCH)
  1. Engage the 2 claws to install the height control mode select switch (No. 2 absorber control switch).

    NOTICE:
    Securely engage the 2 claws.



3. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY


    B222976
  1. Connect the connectors.

  1. Attach the 6 clips to install the console panel.

  1. Install the clip.



4. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY


    B161742
  1. Attach the 12 clips to install the console panel.



5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY


    B167312
  1. Install the shift lever knob and twist it in the direction indicated by the arrow.