Home › Suspension › SUSPENSION CONTROL › ABSORBER CONTROL SWITCH

ABSORBER CONTROL SWITCH > REMOVAL

for Preparation Click here



1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY


    B161741
  1. Twist the shift lever knob in the direction indicated by the arrow and remove it.



2. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


B161742
  1. Detach the 12 clips and remove the console panel.



3. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY


B222976
  1. Move the shift lever to N.

  1. Remove the clip.

  1. Detach the 6 clips and remove the console panel.

  1. Disconnect the connector



4. REMOVE ABSORBER CONTROL SWITCH


C180593
  1. Disengage the 2 claws and remove the absorber control switch.