HEIGHT CONTROL SWITCH > REMOVAL |
| 1. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY |
![]() |
Twist the shift lever knob in the direction indicated by the arrow and remove it.
| 2. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY |
![]() |
Detach the 12 clips and remove the console panel.
| 3. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY |
![]() |
Move the shift lever to N.
Remove the clip.
Detach the 6 clips and remove the console panel.
Disconnect the connector
| 4. REMOVE HEIGHT CONTROL SWITCH (NO. 1 ABSORBER CONTROL SWITCH) |
![]() |
Disengage the 2 claws and remove the height control switch (No. 1 absorber control switch).
| *1 | Height Control Switch (No. 1 Absorber Control Switch) |
| *2 | Height Control Mode Select Switch (No. 2 Absorber Control Switch) |
| 5. REMOVE HEIGHT CONTROL MODE SELECT SWITCH (NO. 2 ABSORBER CONTROL SWITCH) |
Disengage the 2 claws and remove the height control mode select switch (No. 2 absorber control switch).