Home › Vehicle Interior › LIGHTING (INT) › LUGGAGE COMPARTMENT ROOM LIGHT

LUGGAGE COMPARTMENT ROOM LIGHT > INSPECTION

for Preparation Click here



1. INSPECT NO. 2 ROOM LIGHT ASSEMBLY


    E160700E02
  1. Apply battery voltage and check that the room light comes on.

    OK:
    Measurement Condition
    Switch Condition
    Specified Condition
    Battery positive (+)
    → Terminal 1
    Battery negative (-)
    → Terminal 2
    ON
    Room light comes on
    OFF
    Room light turns off
    Battery positive (+)
    → Terminal 1
    Battery negative (-)
    → Terminal 3
    DOOR
    Room light comes on
    OFF
    Room light turns off

    HINT:
    If the result is not as specified, replace the No. 2 room light assembly.