Home › Vehicle Interior › POWER OUTLETS (INT) › CENTER POWER OUTLET SOCKET

CENTER POWER OUTLET SOCKET > REMOVAL

for Preparation Click here



1. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY


    B188235
  1. Detach the 6 clips and separate the console rear end panel.



    B188236
  1. Disconnect the 4 connectors.

  1. Detach the 2 clamps and remove the console rear end panel.



2. REMOVE POWER OUTLET SOCKET ASSEMBLY


    E162366E01
  1. Using a screwdriver with its tip wrapped in protective tape, detach the claw and remove the power outlet socket assembly.



3. REMOVE POWER OUTLET SOCKET COVER NO.2


    E162365
  1. Detach the 2 claws and remove the power outlet socket cover.