Home › Vehicle Interior › LIGHTING (INT) › DOOR COURTESY LIGHT (for Front Door)

DOOR COURTESY LIGHT (for Front Door) > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for both the RH and LH sides.
  2. The procedure described below is for the RH side.



1. REMOVE COURTESY LIGHT ASSEMBLY


    E161801E01
  1. Using a molding remover, detach the claw and remove the courtesy light.

  1. Disconnect the connector.



2. REMOVE COURTESY LIGHT BULB


    E161850
  1. Detach the 2 claws and remove the cover.

  1. Remove the courtesy light bulb.