Home › Vehicle Interior › LIGHTING (INT) › DOOR COURTESY LIGHT (for Rear Door)

DOOR COURTESY LIGHT (for Rear Door) > REMOVAL

for Preparation Click here



1. REMOVE COURTESY LIGHT ASSEMBLY


    E161803E02
  1. Using a molding remover, detach the claw and remove the courtesy light.
    Text in Illustration 
    *1
    Moulding Remover

  1. Disconnect the connector.



2. REMOVE COURTESY LIGHT BULB


  1. w/ Cover:



      E161850
    1. Detach the 2 claws and remove the cover.

  1. Remove the courtesy light bulb.