BACK DOOR COURTESY SWITCH > REMOVAL |
| 1. REMOVE BACK DOOR CENTER GARNISH |
![]() |
Detach the 4 clips and the claw and remove the back door center garnish.
| 2. REMOVE BACK DOOR SIDE GARNISH RH |
![]() |
Detach the 2 clips and remove the back door side garnish RH.
| 3. REMOVE BACK DOOR SIDE GARNISH LH |
![]() |
Detach the 3 clips and remove the back door side garnish LH
| 4. REMOVE BACK DOOR STRAP COVER |
![]() |
Slide the back door strap cover and detach the claw and remove the back door strap cover.
| 5. REMOVE BACK DOOR PULL STRAP |
![]() |
Remove the bolt and remove the back door pull strap.
| 6. REMOVE BACK DOOR TRIM BOARD ASSEMBLY |
![]() |
Detach the 11 clips and remove the back door trim board assembly.
| 7. REMOVE BACK DOOR SERVICE HOLE COVER |
![]() |
Remove the back door service hole cover.
| 8. REMOVE BACK DOOR LOCK PROTECTOR SUB-ASSEMBLY |
![]() |
Detach the 3 claws and back door lock protector sub-assembly.
| 9. REMOVE W/MOTOR BACK DOOR LOCK ASSEMBLY (w/o Power Back Door) |
![]() |
Disconnect the connector.
Detach the clamp.
Remove the 3 bolts and back door lock.
| 10. REMOVE W/MOTOR BACK DOOR LOCK ASSEMBLY (w/ Power Back Door) |
![]() |
Disconnect the connector.
Detach the clamp.
Remove the 4 bolts and back door lock.