Home › Vehicle Exterior › LIGHTING (EXT) › FOG LIGHT ASSEMBLY

FOG LIGHT ASSEMBLY > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below are for the LH side.



1. REMOVE FOG LIGHT COVER


    E161817
  1. Detach the 4 claws and 2 guides and remove the fog light cover.



2. REMOVE FOG LIGHT MOUNTING BRACKET


    E161818
  1. Remove the 3 bolts and the fog light mounting bracket.



3. REMOVE FOG LIGHT ASSEMBLY


    E161819
  1. Detach the 2 claws and remove the fog light.