Home › Vehicle Exterior › LIGHTING (EXT) › REAR LIGHT ASSEMBLY

REAR LIGHT ASSEMBLY > ON-VEHICLE INSPECTION

for Preparation Click here



1. CHECK REAR LIGHT ASSEMBLY LH


    E161855E03
  1. Measure the voltage according to the value(s) in the table below.

    Standard:
    Tester Connection
    Condition
    Specified Condition
    V8-1 - V8-3
    Light control switch OFF
    Below 1 V
    Light control switch in TAIL
    11 to 14 V
    V8-4 - V8-3
    Shift lever not in R
    Below 1 V
    Shift lever in R
    11 to 14 V



2. CHECK REAR LIGHT ASSEMBLY RH


    E161855E04
  1. Measure the voltage according to the value(s) in the table below.

    Standard:
    Tester Connection
    Condition
    Specified Condition
    V7-1 - V7-3
    Light control switch OFF
    Below 1 V
    Light control switch in TAIL
    11 to 14 V
    V7-2 - V7-3
    Shift lever not in R
    Below 1 V
    Shift lever in R
    11 to 14 V