Home › Vehicle Exterior › DOOR / HATCH › POWER BACK DOOR CONTROL SWITCH (for Driver Side)

POWER BACK DOOR CONTROL SWITCH (for Driver Side) > REMOVAL

for Preparation Click here



1. REMOVE NO. 1 SWITCH HOLE BASE


    B192561
  1. Using a moulding remover, detach the 6 claws and remove the No. 1 switch hole base.



2. REMOVE BACK DOOR CONTROL SWITCH


    B223268
  1. Detach the 2 claws and remove the back door control switch.

  1. Disconnect the connector.