REAR BUMPER > INSTALLATION |
| 1. INSTALL REAR BUMPER COVER |
![]() |
Attach the 12 claws to install the rear bumper cover.
![]() |
Attach the 2 harness clamps and connect the connector.
![]() |
Install the 6 bolts for upper side of the rear bumper cover.
Install the 2 bolts for lower side of the rear bumper cover.
Install the 2 screws and the 2 clips.
| 2. INSTALL REAR QUARTER PANEL MUDGUARD LH |
![]() |
Install the rear quarter panel mudguard with the 9 screws and clip.
| 3. INSTALL REAR QUARTER PANEL MUDGUARD RH |