Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR BUMPER

REAR BUMPER > DISASSEMBLY

for Preparation Click here



1. REMOVE REFLEX REFLECTOR ASSEMBLY LH


B191657
  1. Remove the nut and reflex reflector.



2. REMOVE REFLEX REFLECTOR ASSEMBLY RH

HINT:
Use the same procedure as for the LH side.



3. REMOVE REAR BUMPER LOWER COVER


B191658E01
  1. Remove the rear bumper lower cover.

    NOTICE:
    Remove any tape remaining on the cover side.



4. REMOVE REAR BUMPER PAD LH


B191659
  1. Remove the rear bumper pad.

    NOTICE:
    Remove any tape remaining on the cover side.



5. REMOVE REAR BUMPER PAD RH

HINT:
Use the same procedure as for the LH side.



6. REMOVE GROMMET


B191661E01
  1. Remove the 6 grommets.



7. REMOVE NO. 2 FRAME WIRE


B191663
  1. Disconnect the 4 connectors.

  1. Disconnect the 6 clamps and No. 2 frame wire.



8. REMOVE NO. 2 ULTRASONIC SENSOR


Detach the 4 claws and remove the No. 2 ultrasonic sensor as shown in the illustration.

HINT:
The illustration shows the No. 2 ultrasonic sensor for the LH corner and back sensor RH. The horizontal orientation of the No. 2 ultrasonic sensor for the RH corner and back sensor LH is opposite that of the image shown in the illustration.



B354819



9. REMOVE REAR BUMPER UPPER RETAINER LH


B191664
  1. Remove the 3 screws.

  1. Detach the 4 claws and remove the rear bumper upper retainer.



10. REMOVE REAR BUMPER UPPER RETAINER RH

HINT:
Use the same procedure as for the LH side.



11. REMOVE REAR BUMPER END RETAINER LH


B191665
  1. Remove the screw.

  1. Detach the 2 claws and remove the rear bumper end retainer.



12. REMOVE REAR BUMPER END RETAINER RH

HINT:
Use the same procedure as for the LH side.



13. REMOVE REAR BUMPER ENERGY ABSORBER


B191666
  1. Remove the rear bumper energy absorber.



14. REMOVE REAR FLOOR STAY BRACKET LH


B191667
  1. Remove the 2 bolts and rear floor stay bracket.



15. REMOVE REAR FLOOR STAY BRACKET RH

HINT:
Use the same procedure as for the LH side.



16. REMOVE REAR BUMPER ARM BRACKET LH


B191668
  1. Remove the 2 bolts and rear bumper arm bracket.



17. REMOVE REAR BUMPER ARM BRACKET RH

HINT:
Use the same procedure as for the LH side.



18. REMOVE REAR BUMPER BAR BRACKET LH


B191669
  1. Remove the bolt and rear bumper bar bracket.



19. REMOVE REAR BUMPER BAR BRACKET RH

HINT:
Use the same procedure as for the LH side.