REAR DOOR BELT MOULDING > INSTALLATION |
| 1. INSTALL REAR DOOR GLASS OUTER WEATHERSTRIP |
![]() |
Attach the 5 claws and clip to install a new rear door glass outer weatherstrip.
| 2. INSTALL REAR DOOR WINDOW FRAME REAR MOULDING |
| Item | Temperature |
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Rear Door Window Frame Rear Moulding | 20 to 30°C (68 to 86°F) |
Clean the vehicle body surface.
Using a heat light, heat the vehicle body surface.
Remove the double-sided tape from the vehicle body surface.
Wipe off any tape adhesive residue with cleaner.
![]() |
Install a new rear door window frame rear moulding.
Using a heat light, heat a new rear door window frame rear moulding and the vehicle body surface.
Remove the peeling paper from the face of the rear door window frame rear moulding.
Attach the 2 clips and double-sided tape to install the rear door window frame rear moulding.