Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROCKER PANEL MOULDING

ROCKER PANEL MOULDING > INSTALLATION

for Preparation Click here



1. INSTALL ROCKER PANEL FRONT MOULDING ASSEMBLY


    B191707
  1. Attach the clip to install the rocker panel front moulding.

  1. Install the screw.



2. INSTALL BODY ROCKER PANEL MOULDING ASSEMBLY


    B191706
  1. Attach the claw to install the body rocker panel moulding.

  1. Install the 4 screws.



3. INSTALL SIDE STEP ASSEMBLY


B191679
  1. Install the side step with the 8 bolts.

    Torque:
    20 N*m{ 199 kgf*cm , 14 ft.*lbf }