Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR SPOILER

REAR SPOILER > INSTALLATION

for Preparation Click here



1. INSTALL REAR SPOILER COVER


    B219634E01
  1. Attach the 5 pins to install the rear spoiler cover.



    B191671
  1. Install the 2 nuts.

    Torque:
    7.5 N*m{ 76 kgf*cm , 66 in.*lbf }



    B191670
  1. Install the 2 hole plugs.

  1. Connect the connector.



2. INSTALL BACK DOOR SIDE GARNISH LH


B190516
  1. Attach the 3 clips to install the back door side garnish LH.



3. INSTALL BACK DOOR SIDE GARNISH RH


B190515
  1. Attach the 2 clips to install the back door side garnish RH.



4. INSTALL BACK DOOR CENTER GARNISH


B190514
  1. Attach the 4 clips and the claw to install the back door center garnish.