Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR DOOR WINDOW FRAME MOULDING

REAR DOOR WINDOW FRAME MOULDING > REMOVAL

for Preparation Click here



1. REMOVE REAR DOOR WINDOW FRAME REAR MOULDING

HINT:
When removing the rear door window frame rear moulding, heat the vehicle body and rear door window frame rear moulding using a heat light.

Standard:
Item
Temperature
Vehicle Body
40 to 60°C (104 to 140°F)
Rear Door Window Frame Rear Moulding
20 to 30°C (68 to 86°F)

NOTICE:
Do not heat the vehicle body or rear door window frame rear moulding excessively.



    B256625E01
  1. Put protective tape around the rear door window frame rear moulding.

  1. Using a moulding remover, detach the 2 clips and remove the double-sided tape to remove the rear door window frame rear moulding.