Home › Vehicle Interior › SEAT › REAR NO. 2 SEAT ASSEMBLY (for Manual Seat Type LH Side)

REAR NO. 2 SEAT ASSEMBLY (for Manual Seat Type LH Side) > DISASSEMBLY

for Preparation Click here


NOTICE:
Wear protective gloves. Sharp areas on the parts may injure your hands.



1. REMOVE REAR NO. 2 SEAT INNER BELT ASSEMBLY LH


    B193994
  1. Remove the 2 clips.



    B193995
  1. Remove the bolt and rear No. 2 seat inner belt assembly.



2. REMOVE REAR SEAT LOCK COVER OUTER LH


    B193996
  1. Remove the screw.

  1. Detach the 2 claws and remove the rear seat lock cover outer.



3. REMOVE REAR SEAT LOCK COVER INNER RH


    B193998
  1. Remove the screw.

  1. Detach the 3 claws and remove the rear seat lock cover inner.



4. REMOVE REAR NO. 2 SEAT CUSHION ASSEMBLY LH


    B194000
  1. Remove the 2 bolts.

  1. Using a T45 "TORX" socket wrench, remove the 2 "TORX" bolts and 2 bushes. Then remove the rear No. 2 seat cushion assembly.



5. REMOVE NO. 3 SEAT CUSHION SPRING ASSEMBLY LH


    B194001
  1. Remove the 7 hog rings.



    B194003
  1. Remove the hooks and No. 3 seat cushion spring.



6. REMOVE NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY LH


    B194004
  1. Remove the 13 hog rings and No. 2 seat cushion cover.



7. REMOVE REAR SEAT CUSHION COVER LH


    B194006
  1. Remove the screw.

  1. Detach the claw and remove the rear seat cushion cover.



8. REMOVE REAR SEAT CUSHION COVER INNER RH


    B194007
  1. Remove the screw.

  1. Detach the claw and remove the rear seat cushion cover.



9. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY


10. REMOVE REAR SEAT HEADREST ASSEMBLY


11. REMOVE REAR NO. 2 SEAT HANDLE


    B191219
  1. Remove the 2 screws.

  1. Disconnect the cable and remove the rear No. 2 seat handle.



12. REMOVE REAR BACK LOCK CONTROL LEVER SUB-ASSEMBLY RH


    B194008
  1. Remove the screw.

  1. Disconnect the cable and remove the rear back lock control lever.



13. REMOVE REAR NO. 2 SEATBACK COVER LH


    B195227
  1. Detach the 3 claws and remove the rear No. 2 seatback cover.



14. REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY LH


    B194010
  1. Detach the 12 clips and remove the rear seatback board.



15. REMOVE REAR NO. 2 SEAT HEADREST SUPPORT ASSEMBLY


    B194016
  1. Detach the 8 claws and remove the 4 rear No. 2 seat headrest supports.



16. REMOVE SEATBACK COVER WITH PAD


    B195218
  1. Detach the hooks.



    B194018
  1. Detach the hooks and remove the seatback cover with pad.



    B194019
  1. Remove the clip and rear seat belt hook.

  1. Remove the hog ring and seatback cover with pad.



17. REMOVE NO. 2 SEATBACK COVER SUB-ASSEMBLY LH


    B194022
  1. Remove the 16 hog rings and No. 2 seatback cover from the seatback pad.



18. REMOVE REAR SEAT RECLINING COVER INNER LH


    B194025
  1. Remove the screw.

  1. Detach the claw and remove the rear seat reclining cover.



19. REMOVE REAR SEAT RECLINING COVER INNER RH


    B194026
  1. Remove the screw.

  1. Detach the claw and remove the rear seat reclining cover.



20. REMOVE REAR NO. 1 SEAT LOCK CABLE ASSEMBLY


    B194030
  1. Detach the 3 cable ties.

  1. Disconnect the 2 clamps.

  1. Rotate the cable ends and remove the cable.

  1. Pull the cable through the No. 3 rear seatback frame.



21. REMOVE NO. 3 SEATBACK FRAME SUB-ASSEMBLY LH


    B194031
  1. Remove the 5 bolts and No. 3 seatback frame.



22. REMOVE REAR NO. 2 SEAT ROD SUB-ASSEMBLY


    B194032
  1. Remove the 2 bolts and No. 2 seat rod.