REAR CENTER SEAT INNER BELT ASSEMBLY (for Rear No. 1 Seat) > INSTALLATION |
| 1. INSTALL CENTER SEAT INNER BELT ASSEMBLY |
![]() |
Install center seat inner belt assembly with the bolt.
| 2. INSTALL REAR SEAT CUSHION UNDER COVER |
![]() |
Install the rear seat cushion under cover with the 2 screws.
| 3. INSTALL CENTER SEAT HINGE COVER RH |
![]() |
Attach the 3 claws and clip to install the center seat hinge cover.
Install the screw.
| 4. INSTALL CENTER SEAT HINGE COVER LH |
![]() |
Attach the 3 claws and clip to install the center seat hinge cover.
Install the screw.
| 5. INSTALL CENTER SEAT CUSHION ASSEMBLY |
![]() |
Install the 2 bushes to the cushion spring. Then, using a T45 "TORX" socket, install the 2 "TORX" bolts.
Install the 2 bolts.
Pass the inner belt through the hole of the seat cushion.
![]() |
Attach the hook and loop fastener and hook.
| 6. INSTALL REAR SEAT CUSHION HINGE COVER UPPER RH |
![]() |
Attach the 2 claws to install the rear seat cushion hinge cover upper.
Install the screw.
Attach the hook.
| 7. INSTALL REAR SEAT CUSHION HINGE COVER UPPER LH |
![]() |
Attach the 2 claws to install the rear seat cushion hinge cover upper.
Install the screw.
Attach the hook.
| 8. INSTALL REAR CENTER SEAT ASSEMBLY |
Install the rear center seat assembly (Click here).