REAR CENTER SEAT INNER BELT ASSEMBLY (for Rear No. 1 Seat) > REMOVAL |
| 1. REMOVE REAR CENTER SEAT ASSEMBLY |
Remove the center seat assembly (Click here).
| 2. REMOVE REAR SEAT CUSHION HINGE COVER UPPER LH |
![]() |
Detach the hook.
Remove the screw.
Detach the 2 claws and remove the rear seat cushion hinge cover.
| 3. REMOVE REAR SEAT CUSHION HINGE COVER UPPER RH |
![]() |
Detach the hook.
Remove the screw.
Detach the 2 claws and remove the rear seat cushion hinge cover.
| 4. REMOVE CENTER SEAT CUSHION ASSEMBLY |
![]() |
Detach the hook and loop fastener and hook.
![]() |
Remove the 2 bolts.
Using a T45 "TORX" socket wrench, remove the 2 "TORX" bolts and 2 bushes. Then remove the center seat cushion.
| 5. REMOVE CENTER SEAT HINGE COVER LH |
![]() |
Remove the screw.
Detach the 3 claws and clip and remove the center seat hinge cover.
| 6. REMOVE CENTER SEAT HINGE COVER RH |
![]() |
Remove the screw.
Detach the 3 claws and clip, and remove the center seat hinge cover.
| 7. REMOVE REAR SEAT CUSHION UNDER COVER |
![]() |
Remove the 2 screws and rear seat cushion under cover.
| 8. REMOVE CENTER SEAT INNER BELT ASSEMBLY |
![]() |
Remove the bolt and center seat inner belt assembly.