POWER SEAT CONTROL ECU (for LH Side) > INSTALLATION |
| 1. INSTALL FOLD SEAT CONTROL ECU |
![]() |
Install the fold seat control ECU with the 2 bolts.
Connect the 2 connectors.
| 2. INSTALL W/ BOX NO. 1 SPEAKER ASSEMBLY (for 14 Speakers) |
![]() |
Install the w/box No. 1 speaker with the 4 bolts.
Connect the connector.
| 3. INSTALL QUARTER TRIM PANEL ASSEMBLY LH (for Manual Seat) |
Connect the connector.
Attach the 11 clips to install the quarter trim panel.
Install the 2 bolts.
Install the 2 clips.

![]() |
Attach the 2 claws to install the cover.
![]() |
Install the outer lap belt anchor with the bolt.
![]() |
Install the outer lap belt anchor with the bolt.
![]() |
Attach the 3 claws to install the outer lap belt anchor cover.
| 4. INSTALL QUARTER TRIM PANEL ASSEMBLY LH (for Power Seat) |
Connect the 5 connectors.
Attach the 11 clips to install the quarter trim panel.
Install the 2 bolts.
Attach the 2 clamps to install the wire harness.
Install the 2 clips.

![]() |
Attach the 2 claws to install the cover.
![]() |
Install the outer lap belt anchor with the bolt.
![]() |
Install the outer lap belt anchor with the bolt.
![]() |
Attach the 3 claws to install the outer lap belt anchor cover.
| 5. INSTALL REAR FLOOR MAT SUPPORT PLATE |
![]() |
Attach the 5 clips and 4 claws to install the rear floor mat support plate.
| 6. INSTALL ROPE HOOK ASSEMBLY |
![]() |
Install the rope hook with the bolt.
![]() |
Attach the 2 claws to install the cover.
| 7. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH |
| 8. INSTALL REAR DOOR SCUFF PLATE LH |
| 9. INSTALL REAR FLOOR STEP NO. 1 COVER |
![]() |
Attach the 2 claws to install the rear floor step No. 1 cover.
| 10. INSTALL REAR FLOOR STEP NO. 2 COVER |
![]() |
Attach the 2 claws to the install the rear floor step No. 2 cover.
| 11. INSTALL REAR SEAT CUSHION HINGE LOWER COVER LH |
| 12. INSTALL REAR NO. 2 SEAT ASSEMBLY LH (for Power Seat) |
Install the rear No. 2 seat assembly LH (Click here).