Home › Vehicle Interior › SEAT › REAR NO. 2 SEAT ASSEMBLY (for Power Seat Type RH Side)

REAR NO. 2 SEAT ASSEMBLY (for Power Seat Type RH Side) > INSPECTION

for Preparation Click here



1. INSPECT POWER SEAT MOTOR ASSEMBLY RH


B194064E01
  1. Check operation of the power seat motor assembly.

    1. Apply battery voltage to the power seat motor and check the operation of the power seat motor.

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → 1
      Battery negative (-) → 2
      Motor gear rotates clockwise
      Battery positive (+) → 2
      Battery negative (-) → 1
      Motor rear rotates counterclockwise

      If the result is not as specified, replace the power seat motor.



2. INSPECT POWER SEAT MOTOR ASSEMBLY LH


B194065E01
  1. Check operation of the power seat motor.

    1. Apply battery voltage to the power seat motor and check the operation of the power seat motor.

      OK:
      Measurement Condition
      Specified Condition
      Battery positive (+) → 1
      Battery negative (-) → 2
      Motor gear rotates clockwise
      Battery positive (+) → 2
      Battery negative (-) → 1
      Motor rear rotates counterclockwise

      If the result is not as specified, replace the power seat motor assembly.