DTC C1AB8 Destination Information Undefined |
| DTC Code | DTC Detection Condition | Trouble Area |
| C1AB8 | The blind spot monitor sensor cannot communicate with the main body ECU. |
|
| 1.CHECK CAN COMMUNICATION SYSTEM |
Check for DTCs of the CAN communication system (Click here).
|
| ||||
| OK | |
| 2.REPLACE MAIN BODY ECU (COWL SIDE JUNCTION BLOCK LH) |
Replace the main body ECU.
| NEXT | |
| 3.RECHECK DTC |
Recheck for DTCs and check if the same DTC is output again.
|
| ||||
| OK | ||
| ||