Home
›
Engine / Hybrid System
›
3UR-FE LUBRICATION
›
OIL AND OIL FILTER
OIL AND OIL FILTER > REPLACEMENT > Preparation
SST
09228-06501
Oil Filter Wrench
EQUIPMENT
Oil pressure gauge
-
Steel square
-
Torque wrench
-
LUBRICANT / for Type A:
Item
Capacity
Classification
Drain and refill
without Oil filter change
6.6 liters (7.0 US qts, 5.8 Imp qts)
ILSAC multigrade engine oil
0W-20
5W-20
(0W-20 is best choice for fuel economy and good starting in cold weather.)
with Oil filter change
7.0 liters (7.4 US qts, 6.2 Imp. qts)
Dry fill
8.4 liters (8.9 US qts, 7.4 Imp. qts)
LUBRICANT / for Type B:
Item
Capacity
Classification
Drain and refill
without Oil filter change
7.1 liters (7.4 US qts, 6.2 Imp qts)
ILSAC multigrade engine oil
0W-20
5W-20
(0W-20 is best choice for fuel economy and good starting in cold weather.)
with Oil filter change
7.5 liters (7.9 US qts, 6.6 Imp. qts)
Dry fill
9.3 liters (9.8 US qts, 8.2 Imp. qts)
RECOMMENDED TOOLS
09010-3C110
Set, Hexagon Socket Wrench
(09013-6C110)
Socket Hexagon
6mm
09082-00040
TOYOTA Electrical Tester
(09083-00150)
Test Lead Set
SSM
Toyota Genuine Seal Packing 1282B, Three Bond 1282B or equivalent
-
Toyota Genuine Adhesive 1344, Three Bond 1344 or equivalent
-